Select Region
Find a Salesperson
Our heavy duty line of feeders provide a cost-effective means to feed or screen large volumes of bulk material for applications where limited feed rate adjustability is required, designed for applications where limited feed rate adjustability is required. Eriez Vibratory Feeders are ideal for applications such as coal or stone processing, recycling, and scrap recovery. Our feeders can be provided with unique tray designs for your specific applications.
Eriez’ B-HC High Capacity Feeders boast the widest capacities in the industry. They feature a drive and electromagnetic coil design with a stronger Rare Earth permanent magnetic armature assembly. With four different models, their feed capacities range from 330 Tons (300 MT) to 1100 Tons (982 MT) per hour.
These rugged electromagnetic feeders are ideal for metering material to belt conveyors, screens, crushers, and elevators.
Eriez unique AC drive applies power on both the forward and reverse direction of the feeder tray, giving superior linearity and control compared to an attract-release design.
The simplicity of Eriez’ drive powered by alternately opposing and attracting magnetic forces assures low maintenance and accurate feeding. There are no sliding or rotating parts, power consumption is low, and installation is easy.
The drive assembly is dust and moisture resistant, which extends coil life.
In addition to the wide variety of standard trays, special trays such as tubular, covered, screens, and various liners, etc. are available.
65-B High Capacity Electromagnetic Vibratory Feeder
75-B High Capacity Electromagnetic Vibratory Feeder
100-B High Capacity Electromagnetic Vibratory Feeder
Our heavy duty line of Brute Force feeders provide a cost effective means to feed or screen large volumes of bulk material for applications where limited feed rate adjustability is required. Brute Force feeders are ideal for applications such as coal or stone processing, recycling and scrap recovery. Eriez BF feeders can be provided with unique tray designs for your specific application.
Features:
Feeder tray motion is provided by eccentric weights mounted on synchronized, counter-rotation, twin motors. The motors counteract each other to minimize the isolation problems associated with single rotary vibrator drive systems. Feed rate can be varied by adjusting the weights. The twin motor drives operate on standard AC power.
Dust-tight construction and splash-proof design make the motors suitable for dusty, dirty environments, as well as outdoors in rain or snow. Heavy-duty construction and long-lift bearings
Eriez HVF mechanical feeders are straight-forward, rugged, vibrating machines that move high volumes of bulk materials reliably and economically. The feeder is a two-mass vibrating system, spring coupled, excited by a motor-driven eccentric shaft. Adjustable-angle rubber springs transmit the exciting force which can “fine tune” the motion of the trough to optimize the feed rate for a specific application.
The remarkably compact, design of the Model HVF feeder presents an extremely low profile requiring minimum headroom for easier installation.
The ability of the specially designed polyisoprene rubber springs to amplify the trough stroke results in low horsepower requirements. Power is provided by a standard three-phase, 230/460 volt TEFC 60Hz motor. Hazardous environment motors are also available.
Adjustable, variable-speed sheaves or variable frequency controls are available to provide feed rate adjustability within acceptable operating frequencies.
<!--cke_bookmark_91S--><!--cke_bookmark_91E-->
Eriez Feeder, Conveyor & Screener Product Selection Guide
Heavy Duty Vibratory Feeders Brochure
Controls for Electromagnetic Vibratory Equipment Brochure
For technical assistance or to request a quote, complete this form.
RFQ Form