Recycling Industry Equipment

Superior metal recovery at a fraction of the cost to operate and maintain an air driven sorter.

Eriez' new FinesSort™ Metals Recovery System is the ultimate in fine particle metal reclamation FinesSort's series of powerful magnetic components recover valuable ferrous and non-ferrous metals from the fines waste stream in scrap yards. This system not only reduces the amount of waste destined for landfill, but reclaims thousands of pounds of metals per day.

Ideal for material recovery facilities wishing to automate removal of non ferrous metals from trash, msw, sand, glass, dirt, CTD, electronic scrap, and shredded automobiles. Available in feed widths of 24, 36, 48 and 60 inches (610, 914, 1220, and 1524 mm).

Automatically remove ferrous from nonferrous materials conveyed in deep burdens on almost any type of conveyor or chute. Ideal for separation applications on wet or dry, fine or coarse materials.

Low-horsepower, high-capacity mechanical feeders handle bulk materials in volumes up to 2250tph (2040mtph). Low-profile, requires minimum headroom. Simple, stable, variable controller. Wide variety of trough sizes and types available.

Eriez offers a complete line of vibratory equipment to convey, screen, and feed materials in quanities rangining from a few spoonfuls to tons per hour. If the many standard systems available are not quite right for your operation, Eriez Magnetics Technical Center can develop custom-designed vibratory and screening equipment to precisely meet your needs.

Designed for the removal of ferrous material from shredded automobiles, bottom ash, slag and other recyclable scrap including chips, turnings and stampings. Models available with permanent, rare earth, and combined permanent and electromagnetic circuits, crisscross or agitator-type magnetic fields, and heavy duty construction. Drum designs in many diameters and widths.

Eriez Rare Earth Drum Separators effectively collect fine ferromagnetic and paramagnetic materials in ore treatment operations. Powerful permanent magnets enable more efficient separation performance for a broader range of application than ever before.

Eriez manufactures the broadest range of metal detectors in the industry. Whether looking for small ferrous or nonferrous metal pieces, tramp metal or digger teeth, we can provide you with a metal detector to solve practically every metal contamination problem. Contact us for our assistance in selecting the appropriate metal detector for your application.

Mechanical Conveyors are highly efficient, single-mass conveyors, and are designed to move light loads of bulk material reliably and economically. A wide range of models are available to move products.

Removes large & small tramp from nonmagnetics. Powerful magnetic pulleys are used for effective separating heavy tramp iron and fine iron contaminants from conveyor transported materials.

Eriez interpole magnetic field attracts iron from nonmagnetic materials conveyed on a belt. Easy installation. Self-cleaning operation. Industry-leading magnetic field strength. Eighty combinations of diameters from 8 to 36-inches (203 to 914mm) and belt widths from 8 to 60-inches (203 to 1524mm). Permanant and electromagnetic units are available.

Dry Low Intensity Magnetic Separators (DLIMS) for automatic continuous concentration of magnetic ores, removal of magnetite from fly ash, purification of ground slag, foundry sand, cement and minerals.

New, stronger permanent magnetic separators for purification or concentration of weakly magnetic materials.

Electrostatic separation relies on the difference in surface conductivity of the materials to be separated. Conductive and nonconductive particles such as chopped wire and computer scrap can be efficiently separated.

Traps are used to purify products in liquid and slurry lines by removing small particles of scale, oxides and iron contaminants. Easy to inspect and clean. Six different models. Rare Earth elements available.

A PT (Pulley-Type) Separator, whether standard or special, may well provide the answer to a difficult separation problem requiring the use of a magnetic pulley.

These Electromagnetic Demagnetizing Coils have been specifically designed to give many years of maintenance-free service for demagnetizing natural magnetite flowing through pipelines following recovery by a magnetic separators.

Eriez line of wet concentrators offer unique systems for the concentration or classification of coal, iron ore and industrial minerals using a modified hindered-bed approach. The hindered-bed concentration method used in the Crossflow or Hydrofloat Separator provides an economical and efficient means of sizing material such as sand and phosphate. The CoalPro column flotation cell provides an innovative design providing low operating cost, low maintenance cost and no aeration pumps. Eriez provides a full range of column flotation services from evaluative studies through equipment design, fabrication and commissioning.

For automatic, continuous recovery of magnetite or ferrosilicon in heavy media operations and concentration of ferrous and weakly magnetic ores.

Eriez Model HMDA Wet Drum Separators improve the efficiency and reduce the costs of media recovery in heavy media operations.

For high capacity, continuous removal or concentration of feebly magnetic materials. WHIMS separators with capacities up to 120 tph have been custom-designed for applications where high intensity magnetic separation can do the job most economically.

Need to reliably separate aluminum flakes from polyethylene terephthalate (PET) at your facility?

Use the linked text below to review articles about Eriez, its products, applications and its people. Choose from the following list: